Question 1: Create a Data Validation using Spreadsheet for the range A1:B5 so that only the numbers between 1 and 500 can be written in this range. For the same range, specify an input message “Enter any number between 1 and 500” and specify an error message, which will appear when a wrong value is entered in the range.

लिखी जा सके। उसी रेंज के लिए, एक इनपुट संदेश स्पेशिफाई करें Enter any number between 1 and 500 और A1: B5 रेंज के लिए स्प्रेडशीट का उपयोग करके डेटा वैलिडेट करें ताकि इस रेंज में केवल 1 और 500 के बीच की संख्या एक त्रुटि संदेश निर्दिष्ट करें, जो कि रेंज में गलत वैल्यू दर्ज करने पर दिखाई देगा।

Answer1:

1. Firstly open LibreOffice calc. सबसे पहले लिब्रे ऑफिस कैल्क खोलें।
2. Select range from A1: B5 then Go to Data > Select Validity -> Then Validity dialog box will appear

on your screen.

A1: B5 रेंज चुनें फिर डेटा मेन्यू पर जाएं-वैलिडिटी चुनें-फिर वैलिडिटी डायलॉग बॉक्स आपकी स्क्रीन पर दिखाई देगा।

3. In this dialog box, Select Whole Numbers in Allow list. Then select Valid Range in the Data field list. And Type Minimum value 1 and Maximum value 500.

इस डायलॉग बॉक्स में, Allow सूची में Whole Numbers चुनें। फिर Data फील्ड सूची में Valid Range का चयन करें और Minimum वैल्यू 1 और Maximum वैल्यू 500 टाइप करें।

4. For the same range to specify an input message, Go to Input help tab in the validity dialog box, And type ” Enter Any Number between 1 and 500″ in the Input help field.

समान श्रेणी के लिए, इनपुट संदेश स्पेशिफाई करने के लिए validity डायलॉग बॉक्स में Input help टैब पर जाएं, और Input help फील्ड में “Enter Any Number between 1 and 500” टाइप करें।

5. To Specify an Error message, Go to Error Alert tab in the Validity dialog box, And type Error message “Wrong value”. And click on OK button.

एक एरर मैसेज स्पेशिफाई करने के लिए, Validity डायलॉग बॉक्स में Error Alert tab पर जाएं, और एरर ज

“Wrong value टाइप करें। और ओके बटन पर क्लिक करें।

Question 2: Create a presentation about Computer Generations. The presentation should contain 5 slides, one for each generation. The text should appear flying in when slide show is run.

कंप्यूटर जेनरेशन के बारे में एक प्रेजेंटेशन बनाएं। प्रेजेंटेशन में 5 स्लाइड होनी चाहिए, प्रत्येक जनरेशन के लिए एक स्लाइड यो चलाते समय टेक्स्ट उड़ते हुए दिखना चाहिए।

Answer 2:

• Firstly open LibreOffice Impress.

सबसे पहले लिब्रे ऑफिस इंप्रेस खोलें।

• In All slides, Type Title & its content, as shown in the below figures.

सभी स्लाइडो में, शीर्षक और उसके कन्टेन्ट टाइप करें जैसा कि नीचे दिए गए चित्रों में दिखाया गया है।

• Then to apply Fly in Animation Effect, select Title or its content of the slide in which you want to apply animation, Click on animation Tab from the sidebar of the LibreOffice Impress & Click on Add(+) button-> Select Fly in from drop down list, as shown in the below figure.

फिर एनीमेशन इफेक्ट Fly in लागू करने के लिए, शीर्षक या स्लाइड के कन्टेन्ट का चयन करें जिसमें आप एनीमेशन लगाना चाहते है और लिब्रे ऑफिस इंप्रेस के साइडबार से एनीमेशन टैब पर क्लिक करें और और Add(+) बटन पर क्लिक करें और ड्रॉप डाउन सूची से फ्लाई इन का चयन करें, जैसा नीचे दिए गए फीगर में दिखाया गया है।

To Slide Show the Presentation

Go to Slide show menu->Select start from first slide or Press F5 key and press Enter key to display the next content of slide.

Slide show मेनू पर जाएं -> Start from first slide का चयन करें या F5 कुंजी दबाएं और स्लाइड के अगले कन्टेन्ट को प्रदर्शित करने के लिए और एंटर कुंजी दबाएं।

To Set the Background Image into the slide

Go to Slide menu->Select Set Background Image then Set Background image dialog box will appear – >From this dialog box, select any image which you want to apply as a slide background & Click on Open button.

इस डायलॉग बॉक्स से किसी भी इमेज का चयन करें जिसे आप स्लाइड बैकग्राउन्ड के रूप में लागू करना चाहते हैं और स्लाइड मेन्यू पर जाएं-> Set Background Image चुनें फिर Set Background image डायलॉग बॉक्स दिखाई देगा->ओपेन बटन पर क्लिक करें।

For Live Class Subscribe Our Youtube Channel Link is given below-

click here

Thanks For Reading the Article M1 r5 practical questions with answers

Also Check Our Latest Uploads

o level practical exam question paper

o level practical exam question paper

o level web design practical paper 2024

The post M1 r5 practical questions with answers (2024) appeared first on .

https://www.youtube.com/@olevelguruji

Question 1: Create Business Cards using shapes, text, and colours in libreoffice writer

Answer

Step 1-Firstly open LibreOffice writer.

Step 2- Go to Insert—–>Shape——> Select Basic Shapes-> Rectangle. And draw the Rectangle.

Step 3- In the shape you will writer the text and you can also take logo .Go to insert—->Shape——> Stars—->select 6 point start.

Watch Full video for Practical 

Questions 2: Open a Spreadsheet and type the following

Step 1- Firstly open LibreOffice calc & Create spreadsheet according to the question.

Step 2- .Sol(1)  Type Formula = B2* C2 in Cell D3 to calculate the total amount of monitors. 

Step 3-  Sol(2) Select cell D3 formula & press Ctrl+C key to copy the formula & press Ctrl+V key to paste formula into the D4,D5,D6 cell.

Step 4- Sol(3) To Find total Amount apply the following formula in D8 Cell.

 =SUM(D3:D6)  (See Image)

Question 3: Create a presentation with 3 slides to give an introduction to yourself. Set the auto timing to show for 1 second, 5 seconds and 3 second for the first,second and third slide respectively.

Answer




Step1- Firsly open LibreOffice Impress.

Step 2- Type Introduction to yourself in three slides.

Step3-Select Slide->Go to Slide menu->Select Slide Transition->Then Right side of Librece Impress Slide Transition pane will appear. In this Go to Advance slide->select After-> 

•  Type 1. sec for first slide,
• Type 3 seconds for second and
• Type 1 second for third slide.

For Practical Watch our video class 

Thanks for Artical I hope You will understanfd the topic OLevel Practical Question Jan2023 well.

Also Check the below Link

Olevel Practical Class-1

LibreOffice Impress Questions with Answers

The post O Level Practical Questions m1r5 appeared first on .

OLevel It Tools Practical Question

Hello Students, In this blog you will learn about OLevel It Tools Practical QuestionWith Steps by steps.libreoffice calc practical questions pdf,libreoffice calc practical questions,libreoffice writer practical questions pdf

Question 1: Create a Database in Calc Spread Sheet. Calculate the Total, Average and print the table as per format below:

Answers

Step 1- Open Libreoffice calc and Enter the data as shown in the question

Step 2- After entring the data type the formula =average(C2:F2) into G2 cell and <Press Enter>. And Select G2 cell and drag so you will all the values. See the table given below

Step 3- Same as the above type total formula=sum(C2:C6) into cell C7 and press enter.And select C7 than drag right side so you will get total of subject1, subject2, subject3 and subject 4.See the table given below

Step 4- To print the above table Go To File>Select print> then print dialog box will appear on the screen.

Question 2. Create a table in LibreOffice Writer as shown below

Do the Following

1. In the total marks column, entries should be calculated using formulas and it is the sum of marks in physics and marks in chemistry.

2. Insert a row at the end of the table ans also find grand total using formula.

3. Sort the table based on the total marks

Answers

Step 1- Firstly open LibreOffice Writer application

Step 2- To create table do the following steps——- GO to Tbale Menu—–>Select Insert table then insert table dialog box will appear on your computer screen.In this box write number of column is 5 and row is 7 & click on insert button .

Step 3- Table will appear on the screen. Enter the column headings that are gien on question like- Roll number,Name,Marks etc.

Step 4- Solution (a)-

To make formula entry in Total Marks column, click on Total marks column and Go to Table menu—>select edit formula or press F2. Then type the folllowing formula=sum(<c2:d2>) and click on apply button

Same as you can type formula in other remaining rows and display the output.

Step 5- Solution (b)-

To insert a new row at the end of the table, Click on Last Row of a table, Go To table menu—>Select Insert—>Rows Below

Then table row will be inserted into the existing table. In this Row find the Grand Total and type the following formula=sum(<E2:E7>)

Question 3:  Type the following data in spreadsheet ans save it

Do The following

1. 1. 1. Complete Column C for finding product x*y

      2. Find sum of X column at the end of the data

      3. Find sum of Y column at the end of the data

1. Find sum of X*Y  column at the end iof the data

2. Find Sum of X^2

3. Find Sum of Y^2

Answer–

Step 1- Firstly Open Libreoffice Calc and enter the data as shown in the given question Watch video for practical

Step 2-

Solution (1)- To Complete clumn C for finding product x*y, Type formula=A2*B2 in column C2 & select Fill by drag and drop.

Step 3- Solution (2)

To find sum of X column at the end of data type the formula=sum(A2:A9) into the A10 cell

Step4 – Solution (3)

Type the fomula= sum(B2:B9) into the B10 cell & press enter

Solution (4)

Type the fomula= sum(C2:C9) into the C10 cell & press enter

Solution (5)

Find the sum of X^2 by apply the formula=A^2 (^ sign present in number 6 key)

Type the fomula= sum(D2:C9) into the B10 cell & press enter

Solution (6)

Find sum of Y^2 by apply the formula=B^2

Type the fomula= sum(E2:E9) into the E10 cell & press enter

For Practical watch our video class on youtube by click on the below link

The post OLevel It Tools Practical Question appeared first on .